Dual Way Bidirectional ESC for RC Boat Tank Brushed Motor Spare Parts

Specification: The power supply should be a 2s or 3s battery, and the use of a 4s battery is not recommended. The output current of the ESC is 5A x 2, and exceeding 5A will result in the ESC burning out.

Description: - The recommended motors are 130 and 180 brush motors, but they are not included in the package. - The ESC can go forward and backward. - The dual mode switch allows for the adjustment of the differential turn of the two motors or the independent control of the forward and reverse of the two motors. - In the mixed control mode, the ESC can be used for a double-motor differential turn boat, tractor, or tracked vehicle, among other applications.

Features: 【Power-on Prompt】: When the ESC is powered on, you will hear a beep from the motor, prompting you to start at the center position. The throttle channel 1 is set to 1500, and you will hear the motor beep, indicating that the ESC has started. 【Out of Control Protection】: If the signal is lost, the throttle needs to be returned to the center and unlocked again for safety and motor protection. 【Signal Abnormality】: If the PPM1 signal is greater than 2.1MS or less than 0.9MS, it is considered an abnormal signal, equivalent to signal loss. 【Over Current Protection】: The ESC has a 130-degree overheat protection and hardware over-current protection. 【Power-off Protection】: If the power supply voltage is lower than 4V, the ESC will restart.

The ESC has three modes, which should be selected before powering on (using a toggle switch): 1. Mixed Control (Differential Speed) Mode: The two outputs are controlled by two PPM signals to achieve differential speed control, and a differential remote control is required. 2. Two-way Synchronous Control Mode: The output power of the two channels is the same (only connected to PPM1, not connected to PPM2), and the motors can also move forward and reverse. 3. Two Independent Control Mode: MC1 is consistent with PPM1, and MC2 is consistent with PPM2.

Please Note: - The ESC cannot use a 4s battery. - Exceeding 5A will burn out the ESC.

Application: Suitable for 1/35 RC model cars, tanks, and 4WD RC cars.

Please Note: - Above 5A will burn out the ESC. - 130 and 180 brush motors are recommended. - The power supply should be 5V, and the signal input is PWM if the ESC does not work well.

Adjustable Mode: Mixing/independent (white switch; outward independent / inward mixing).

Excellent Performance: The ESC has a small size with a built-in capacitor module, strong resistant current capability, and good heat dissipation.

Multiple Protections: Throttle signal loss protection, out of control protection, overcurrent protection, and overheat protection (130 degrees).

product information: